Types of Keys For Trucks
In the mid to late 90's, manufacturers began placing a transponder chip inside the head of their keys. This chip emits an electronic signal that is interpreted by the receiver inside your ignition. If the code doesn't match the code, your car won't start.
Beishir can make these "chip keys" at a fraction the price of a dealer.
Transponder Keys
A transponder, also referred to as an immobilizer or chip key, is a tiny electronic microchip that is embedded in the head of an automobile key. It is an individual code. When the key is inserted into an ignition, it sends an indication to the vehicle's computer that confirms that the key is legitimate and has been activated. The vehicle will then unlock the door, allowing you to start the engine and disable any security systems when the code is valid. This technology prevents theft and provides an extra layer of security for your vehicle.
Transponder keys appear like standard metal keys, but have a plastic cap over the top of the key, where the transponder is. These keys can be flat keys, a laser key (also called a sidewinder key) or a tibbe-style key used on some Ford and Jaguar models.
When the key is put into an ignition, a specially-designed antenna inside the ignition ring sends out a blast of radio frequency energy to the transponder chip within the key. keys truck responds by sending a code back to the ring of antennas. The computer of the vehicle then validates the signal and, if it is valid, allows the vehicle to start.
Because the chips that make up these keys are unique, they cannot be duplicated. This has led many people to go to dealers to fulfill all their car key needs. This can result in expensive prices and lengthy appointments. Fortunately, a professional auto locksmith can create a replacement or reprogramme the transponder key at only a fraction of the cost.
A professional auto locksmith can also be used to test the operation of a transponder. The expert can check for physical damage to the key and the microchip itself, and also confirm that the transponder is communicating with the immobilizer system of the vehicle correctly. A key that isn't communicating properly will show indications of failure, including trouble starting the vehicle or displaying error codes on the dashboard.
Sidewinder Keys
A sidewinder car key is a special type of key that's been designed to add security to your vehicle. The keys are designed in a way that thieves are unable to break into your lock, scratch your lock, or rekey your ignition. They work by pairing an edge that is mechanical with a small RFID chip or RFID Emulation circuit. These chips emit radio frequency that helps your car detect if the key is authorized and allows it to turn on the engine.
Although they aren't as popular as a transponder and a sidewinder is still a viable option for your truck if you want increased protection from theft. While these keys are difficult for thieves to pick or bump, they can still be damaged by a re-keying process. Therefore, it is important to choose an experienced locksmith for all your key-related needs for your vehicle.
The car keys were initially introduced to the automotive industry as a tool to prevent theft in the early 90s. The aim was to reduce the incidence of car thefts and the technology has since evolved into a standard feature on all modern vehicles.
The most distinctive characteristic of a sidewinder's keys is the blade design that is high-security. Laser cut keys differ from older metal blanks with notches cut on the side. Instead, they have the winding grove cut into the blade's center with a uniform thickness. This unique blade design gave the key its name and is a certain method of identifying a sidewinder from a regular metal key.
Sidewinder keys have other characteristics, besides the cutting of a wavy blade. They are distinct from traditional metal car key. The key blanks have an elongated central part (sometimes referred to as the "web") that is able to support and strengthen the key.
This web is essential as it will ensure that the key will fit into the locking cylinders of your car. However, if the material is too thick, it could cause the key to fail when it is inserted or cause damage to the locks when forced into the lock too hard. This is why it is essential to hire a professional locksmith interpret the original cuts (also known as the key code) on your current key and cut the new key to the appropriate size.
Wafer Keys
A wafer key, also referred to as a cylindrical lock is a type of lock that makes use of flat wafers to stop the rotation of a plug. The wafers are protruded from upright slots inside the lock's housing, and are fixed into large grooves that are located on the outside side of the plug. When the correct key is inserted, the wafers retract back into the plug and stop turning. A lock with a wafer is more difficult to select than pin tumbler locks, but it is still a breeze for the average person to master with perseverance and practice.
Wafer locks are popular due to many reasons. They're cheap to manufacture they are secure and reliable operation, and are simple to reset. These benefits make them popular for residential, commercial and industrial applications. Wafer locks are compatible with a variety of keying systems. They are a versatile and a flexible security solution.
To ensure that keys aren't interchangeable, manufacturers usually utilize key codes that have two increments between each cut. This makes it much easier to create an error in a key because each increment only allows for a limited number of combinations. This is the reason you'll notice that most utility locks have a series of cuts that are all a certain height, for example a 1 and a 2 instead of an increment of one or three.
To pick a wafer lock, you must first place a diamond-shaped or ball-shaped pick inside the lock and apply a slight pressure to each wafer. Once you feel that all the wafers have been pulled back into the plug, then insert a key that has identical cuts into the lock and then turn it to open it.
Then you can begin to work on picking the other side of the lock. It's typically the first thing you choose, since it's what stops the lock from turning freely. You'll also have to find the binding wafer. This can be identified by the feel of every wafer. Because of its tension the binding wafer will not spring up as easily.
Laser Keys
When it concerns keys for trucks, laser cut keys are a more advanced technology that offers better protection against car theft. They are expensive but they can add an additional layer of security to your vehicle that traditional keys can't provide. They are made using a laser cutter rather than the standard key cutting machine, and come with distinctive patterns that make them difficult to duplicate. This makes it less likely that thieves will be able to use your key to steal your car, truck or other valuable objects.
Contrary to traditional keys that have notches that are cut along the edge to an exact depth, laser-cut keys have laser grooves that are cut by laser. They are harder to copy and cannot be duplicated at any corner store that has a mechanical machine for cutting keys. They also have an engraved laser pattern on both sides, meaning they can be put into locks from either side and still work.
In the 1990s, laser-cut keys were developed to improve security on high-end automobiles and other vehicles. In addition to the fact that they are difficult to copy, they also have a transponder chip inside them. The chip communicates with the vehicle's receiver to unlock it and start it. If the wrong chip is in close proximity the vehicle will not start if the wrong key is present.
Laser-cut keys are not just more secure, but they are also easier to use. Since they are designed to be inserted into the lock from both sides, they can be used to open the door with just one hand. Traditional keys require both hands to insert, which can be inconvenient for those with hectic schedules and a lot on their plate.
While the increased security of keys made with lasers cost more tag, it is worth it in the long in the long. The loss of one of your keys can be expensive therefore investing in this extra security is a wise investment. A professional locksmith can help you choose the best type of key for your vehicle and then program it so that it works with your specific vehicle.